Eastron SDM230-MODBUS-MID Energymeter

Single Phase 100A MID (Multi-Function With Serial Communication)

SDM230Modbus is an advanced digital single phase multi-function energy meter, which measures up to 100 A direct load. The SDM230modbus has 15 measured parameters and 4 different kWh measurment modes which has been designed around the development of regeneration, such as solar and battery storage. The means the pulsed output can be configured for the following:

• Import + Export = Total kWh
• Export - Import = Total kWh (Nett)
• Import = Total kWh
• Export = Total kWh

A communication port is provided, RS-485 Modbus RTU and Communication parameters are password protected in the setup mode. The SDM230-2T can measure energy from two different power supplies acting as a dual tarriff meter.

SPECIFICATIONS

Nominal voltage (Un): AC 120 or 230 V
Operational voltage: 80% ~ 120% of Un
Operational frequency range : 50/60 Hz
Basic current (Ib): 10 A
Maximum rated current (Imax): 100 A
Insulation capabilities: AC voltage withstand (4 kV for 1 minute) + Impulse voltage withstand 6 kV - 1.2 µS