Single Phase 100A MID (Multi-Function With Serial Communication)
SDM230Modbus is an advanced digital single phase multi-function energy meter, which measures up to 100 A direct load. The SDM230modbus has 15 measured parameters and 4 different kWh measurment modes which has been designed around the development of regeneration, such as solar and battery storage. The means the pulsed output can be configured for the following:
Import + Export = Total kWh
Export - Import = Total kWh (Nett)
Import = Total kWh
Export = Total kWh
A communication port is provided, RS-485 Modbus RTU and Communication parameters are password protected in the setup mode. The SDM230-2T can measure energy from two different power supplies acting as a dual tarriff meter.
SPECIFICATIONS
Nominal voltage (Un): AC 120 or 230 V Operational voltage: 80% ~ 120% of Un Operational frequency range : 50/60 Hz Basic current (Ib): 10 A Maximum rated current (Imax): 100 A Insulation capabilities: AC voltage withstand (4 kV for 1 minute) + Impulse voltage withstand 6 kV - 1.2 µS
Klientu atsauksmes
Atsauksmju vēl nav — atsauksmi var uzrakstīt no sava pasūtījuma pēc pirkuma
