Katalogas
TINYCONTROL Kodas: 548182

TINYCONTROL 100A/1V Induction current sensor SCT-013-100 (1V)

11.00 € / vnt.
Tiekėjo sandėlyje: >5

Pristatymas

Atsiimti iš parduotuvės
03.11.2026 *
Nemokamai
Paštomatas
04.11.2026 *
3.01 €
Pristatymas per kurjerį
06.11.2026 *
12.09 €
* Prekių gavimo data yra apytikslė.
Greitas pristatymas
Kurjeris ir paštomatai
Gamintojo garantija
Oficialus platintojas
Prekių grąžinimas
Grąžinimas per 14 dienų
Konsultacija
+371 27 879 580
Aprašymas

Tinycontrol SCT-013-100A/1V

Non-invasive inductive sensor for measuring AC current up to 100 A with a voltage output of 1 V.

This current sensor allows simple and safe AC current measurement without interrupting the measured circuit. Just clamp it onto a single conductor and it will immediately provide a voltage output proportional to the flowing current. Thanks to the integrated burden resistor, it offers a direct 1 V AC output at a maximum current of 100 A.

The sensor is terminated with a standard 3.5 mm jack connector, making it easy to connect to Arduino platforms or other measurement systems. Ideal for energy consumption monitoring, home automation, or industrial applications.

  • Measurement range 0 to 100 A AC
  • Output voltage 1 V AC proportional to the measured current
  • Non-invasive measurement via magnetic clamp without interrupting the circuit
  • Built-in burden resistor for direct voltage output
  • Maximum measured cable diameter 12 mm
  • Terminated with 3.5 mm jack connector for easy connection
  • Compatible with Arduino and other measurement platforms
  • 1 m cable length for flexible placement

Operating principle
The sensor operates on the principle of induction – it measures the magnetic field generated by AC current flowing through a conductor. For proper operation, the sensor must be clamped onto only one conductor (phase or neutral). If clamped over both conductors simultaneously, the magnetic fields will cancel out and the sensor will not indicate any value.

Practical applications
The sensor can be used to measure the power consumption of electrical appliances, monitor solar systems, or as part of smart meters. Thanks to the analog output, it can be connected to analog inputs of Arduino controllers or the LAN controller v3.

BASIC SPECIFICATIONS

Model: SCT-013-100
Measurement range: 0 to 100 A (AC)
Output voltage: 1 V AC
Maximum cable diameter: 12 mm
Built-in burden resistor: yes
Connector type: 3.5 mm jack
Cable length: 1 m
Weight: 45 g

Klientų atsiliepimai

Atsiliepimų dar nėra — atsiliepimą galima parašyti iš savo užsakymo po pirkimo

Pristatymas ir garantija

Pristatymas
Paštomatas
Kurjeris
Atsiėmimas parduotuvėje
Garantija
Gamintojo garantija
Oficialus platintojas
Sąskaita ir garantinis talonas komplekte
Grąžinimas
14 dienų teisė atsisakyti sutarties
Pinigų grąžinimo garantija
Nemokamas brokuotų prekių grąžinimas
TINYCONTROL Sensirion SCD40 CO2 concentration, humidity and temperature sensor with I2C interface for LK3 & LK4
Tiekėjo sandėlyje: 4
46.91 € / vnt.
TINYCONTROL 4-port PoE switch with PV panel and battery operation
Tiekėjo sandėlyje: 3
167.25 € / vnt.
TINYCONTROL door/window opening sensor for LAN controller LK3 and LK4
Tiekėjo sandėlyje: 5
5.30 € / vnt.
TINYCONTROL Temperature sensor PT1000 for LAN controller LK3 a LK4
Tiekėjo sandėlyje: >5
10.93 € / vnt.
TINYCONTROL Waterproof temperature sensor Dallas DS18B20 for LAN controller LK3 and LK4
Tiekėjo sandėlyje: 3
11.80 € / vnt.
TINYCONTROL Temperature and humidity sensor ASAIR (AM2301B) for LAN controllers LK3 and LK4
Tiekėjo sandėlyje: >5
11.01 € / vnt.
TINYCONTROL air quality sensor SPS30 for LK3 and LK4 controllers
Tiekėjo sandėlyje: 5
71.17 € / vnt.
TINYCONTROL current sensor SCT up to 30A for LAN controller LK3 and LK4
Tiekėjo sandėlyje: >5
13.38 € / vnt.
Krepšelis