Katalogs
TINYCONTROL Kods: 548182

TINYCONTROL 100A/1V Induction current sensor SCT-013-100 (1V)

9.08 € / gb.
Piegādātāja noliktavā: >5

Piegāde

Saņemt veikalā
02.11.2026 *
Bezmaksas
Saņemt pakomātā
03.11.2026 *
3.01 €
Piegāde ar kurjeru
05.11.2026 *
12.09 €
* Preču saņemšanas datums ir aptuvens.
Ātra piegāde
Kurjers un pakomāti
Ražotāja garantija
Oficiālais izplatītājs
Preču atgriešana
14 dienu atgriešana
Konsultācija
+371 27 879 580
Apraksts

Tinycontrol SCT-013-100A/1V

Non-invasive inductive sensor for measuring AC current up to 100 A with a voltage output of 1 V.

This current sensor allows simple and safe AC current measurement without interrupting the measured circuit. Just clamp it onto a single conductor and it will immediately provide a voltage output proportional to the flowing current. Thanks to the integrated burden resistor, it offers a direct 1 V AC output at a maximum current of 100 A.

The sensor is terminated with a standard 3.5 mm jack connector, making it easy to connect to Arduino platforms or other measurement systems. Ideal for energy consumption monitoring, home automation, or industrial applications.

  • Measurement range 0 to 100 A AC
  • Output voltage 1 V AC proportional to the measured current
  • Non-invasive measurement via magnetic clamp without interrupting the circuit
  • Built-in burden resistor for direct voltage output
  • Maximum measured cable diameter 12 mm
  • Terminated with 3.5 mm jack connector for easy connection
  • Compatible with Arduino and other measurement platforms
  • 1 m cable length for flexible placement

Operating principle
The sensor operates on the principle of induction – it measures the magnetic field generated by AC current flowing through a conductor. For proper operation, the sensor must be clamped onto only one conductor (phase or neutral). If clamped over both conductors simultaneously, the magnetic fields will cancel out and the sensor will not indicate any value.

Practical applications
The sensor can be used to measure the power consumption of electrical appliances, monitor solar systems, or as part of smart meters. Thanks to the analog output, it can be connected to analog inputs of Arduino controllers or the LAN controller v3.

BASIC SPECIFICATIONS

Model: SCT-013-100
Measurement range: 0 to 100 A (AC)
Output voltage: 1 V AC
Maximum cable diameter: 12 mm
Built-in burden resistor: yes
Connector type: 3.5 mm jack
Cable length: 1 m
Weight: 45 g

Klientu atsauksmes

Atsauksmju vēl nav — atsauksmi var uzrakstīt no sava pasūtījuma pēc pirkuma

Piegāde un garantija

Piegāde
Pakomāts
Kurjers
Saņemšana veikalā
Garantija
Ražotāja garantija
Oficiālais izplatītājs
Rēķins un garantijas talons komplektā
Atgriešana
14 dienu atteikuma tiesības
Naudas atgriešanas garantija
Bezmaksas atgriešana bojājuma gadījumā

Līdzīgas preces

Parādīt visu
TINYCONTROL Sensirion SCD40 CO2 concentration, humidity and temperature sensor with I2C interface for LK3 & LK4
Piegādātāja noliktavā: 4
48.25 € / gb.
TINYCONTROL 4-port PoE switch with PV panel and battery operation
Piegādātāja noliktavā: 3
163.89 € / gb.
TINYCONTROL door/window opening sensor for LAN controller LK3 and LK4
Piegādātāja noliktavā: 5
8.47 € / gb.
TINYCONTROL Temperature sensor PT1000 for LAN controller LK3 a LK4
Piegādātāja noliktavā: >5
10.85 € / gb.
TINYCONTROL Waterproof temperature sensor Dallas DS18B20 for LAN controller LK3 and LK4
Piegādātāja noliktavā: 3
9.73 € / gb.
TINYCONTROL Temperature and humidity sensor ASAIR (AM2301B) for LAN controllers LK3 and LK4
Piegādātāja noliktavā: >5
10.94 € / gb.
TINYCONTROL air quality sensor SPS30 for LK3 and LK4 controllers
Piegādātāja noliktavā: 5
73.22 € / gb.
TINYCONTROL current sensor SCT up to 30A for LAN controller LK3 and LK4
Piegādātāja noliktavā: >5
13.30 € / gb.
Grozs