- Color: Black
- Material: Plastic / ABS
- Usage: Electronics
- Connection Type: RJ45 / Ethernet
- Usage: Electronics
- Connection Type: RJ45 / Ethernet
- Color: Black
- Voltage: 100-240V AC
- USB Ports: 2
- Color: White
- Voltage: 48V DC
- Power: Up to 50W
- Color: White
- Voltage: 24V DC
- Voltage: 12V DC
- Power: Up to 50W
POE injectors — Description
PoE injectors power a Wi-Fi access point, IP camera or phone over the same network cable that carries the data, so the device can go on the ceiling or a mast with no socket nearby – one injector at the switch replaces a call to the electrician. The category lists the Ubiquiti U-PoE 15 W injector U-POE-EU, the Ubiquiti UACC-PoE+-USBC gigabit Ethernet adapter 48 V, the TP-Link TL-POE160S PoE injector and the PoE+ 802.3at to RJ45 and DC 5/9/12 V splitter for non-PoE devices. The Ubiquiti U-PoE 15 W is an 802.3af injector for UniFi access points U6 Lite, U6+ and G4 cameras, with gigabit throughput and up to 100 m of cable, an EU plug and a grounding button. The UACC-PoE+-USBC is a PoE+ adapter that turns a 48 V PoE+ port into USB-C 5 V power for a device – a UniFi Protect ViewPort, Raspberry Pi or a wall tablet, while passing gigabit data through. The TP-Link TL-POE160S is an 802.3at PoE+ injector with 30 W output and gigabit ports for higher-draw access points and PTZ cameras, plug and play with no configuration. The PoE+ splitter does the opposite – it takes PoE+ from the cable and gives data on RJ45 and power on DC 5, 9 or 12 V with a switch for a device without PoE: a 12 V camera, a router or a SIP phone. Choose by device – U-PoE for a UniFi AP, TL-POE160S for a powerful AP, the UACC adapter for a USB-C device, the splitter for a non-PoE camera. Fast delivery across Latvia.