TINYCONTROL tB2 - expansion board with 1-Wire, I2C, OLED

The basic tB2 expansion board contains:
- I2C splitter - 2x RJ-12, 1x I2C micro 1.25 mm, OLED 0.96 inch socket (2.54 mm pitch)
- 1-Wire splitter - 2x RJ12, 1-Wire x3 terminals
The board has spring terminals for convenient connection of DS18B20 sensors (for wire cross-section 0.5 mm2) and a micro JST 1.25 mm connector for the I2C bus, e.g. for connecting the BME280 sensor.

Communication with Lan Controller via the I2C or 1-Wire bus. For this purpose, the board should be connected to the INP6 connector in the Lan Controller using a 6-core cable with RJ-12 plug (included) using one of the sockets, the second socket can be used to connect another 1-Wire or I2C sensor. There is a marking on the board for connecting the DS18B20 sensors to the 1-Wire bus.

Brackets for the display module are included in the kit.

The description of the configuration of sensors and display can be found in the Lan Controller manual.

SPECIFICATIONS

Interface: 2x RJ-12 (I2C/1-Wire), 1x I2C micro (1,25 mm), 3x 3pin connector 1x 4pin connector for display

Power: from the bus

Dimensions: 66 x 36 x 18 mm

The display is not included in the package! You can find it in the reference item under the code NJSGWL0032.