Wireless pool cleaning robot WYBOT M2

Wybot M2 is a wireless pool robot that will clean the bottom, walls, and waterline for you. It works well in pools up to 3 m deep and 400 m² in size, and thanks to its 10,000 mAh battery, it provides up to 5 hours of operation (in Eco Floor mode). It also has a built-in wide-angle camera that automatically detects dirt. It also features IPX8 waterproofing, advanced two-level filtration, and app control. See for yourself that keeping your pool clean doesn't have to be time-consuming and tedious – just let the robot do it! The Wybot M2 uses a gyroscope, infrared sensors, depth sensors, and a vision system to plan optimal cleaning routes. The robot moves according to various patterns, such as Star, Cross, N, H, S, or Z, allowing for thorough coverage of the pool surface without missing corners and hard-to-reach areas. There is also a Dirt Hunting feature, which uses a front camera to detect dirt while cleaning the bottom and concentrates the robot's work where the dirt is actually located, increasing cleaning efficiency. The wide-angle camera and AI vision technology enable active dirt detection and precise removal. The system recognizes various types of debris, including sand, leaves, twigs, stones, hair, and dust, and when operating in Dirt Hunting mode, it provides up to 20 times higher cleaning efficiency compared to standard solutions. The robot works with an app that offers 8 operating modes. With it, you can, for example, set it to clean the entire pool or just the bottom, walls, or waterline. There is also a combined option (walls first, then bottom), as well as Eco Floor, Turbo Floor, and Dirt Hunting functions. With just a few clicks, you can customize the robot's operation to your current needs! The robot is equipped with three motors that provide high suction power and stable operation on various surfaces. This allows it to eliminate all kinds of debris in the blink of an eye! In addition, the two-level filtration system combines a 180 μm filter basket with a 40 ppi sponge. This configuration effectively captures both larger debris and fine particles – perfect for leaves, sand, and more. In addition, the filter opens from the top for easy cleaning and has a rubber partition that prevents secondary release of dirt. The CYCLE TIMER function allows you to adjust the operating time and cleaning frequency to your current needs. The robot can operate in regular mode for daily maintenance or in intensive mode when the pool has not been cleaned for a long time. This solution allows for effective energy management. The Wybot M2 has a dedicated waterline cleaning mode that prevents debris from accumulating on the surface. What's more, the robot's design allows it to overcome drains up to approximately 3 cm high and smoothly climb steps, enabling it to work in pools of varying depths and irregular shapes. The M2 model is suitable for pools of various shapes and surfaces, including fiberglass, vinyl, ceramic tiles, concrete, and natural stone. It also features a powerful 10,000 mAh battery that provides up to approximately 5 hours of operation in Eco Floor mode. This allows for effective cleaning of even large and demanding pools. Included: - Wybot M2 pool robot x1 - Filter x2 - Charger x1 - Hook x1 - Adhesive block x7 - Quick start guide x1 - User manual x1 Manufacturer: WYBOT Model: WYBOT M2 (WY320) Max. recommended pool area: 400 m² Max. depth: 3 m Dimensions: 460 × 420 × 230 mm Weight: 11 kg Operating time: Up to 5 hours (Eco Floor mode) Charging time: Approx. 3.5 hours Battery voltage: 25.5 V Charger input voltage: 100-240 V, 47-63 Hz Charger output: 29.4 V / 4 A Power: 120 W Battery capacity: 10,000 mAh Flow rate: Up to 15 m³/h (3963 GPH) Movement speed: Up to 10 m/min Filter: 180 μm filter basket + 40 ppi sponge Waterproof rating: IPX8 OTA updates: Yes App control: Yes