ELEGOO PLA+ Filament (Star Gray)

ELEGOO PLA+ filament in star gray is a versatile solution suitable for both technical and decorative 3D prints. Its neutral, matte color ensures detail legibility and complements modern aesthetics. This product is made from PLA+ (polylactide plus), a biodegradable, plant-based material enhanced with additives for increased durability. The spool contains 1 kg of filament. **Durability and Precision:** With increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and reduce the risk of blockages. The smooth surface and good heat conduction allow even more complex models to come out cleanly and without deformation. **Convenience and Compatibility:** The material is evenly wound and hand-checked to minimize tangles. It is vacuum-packed with a moisture absorber, allowing immediate printing upon opening. This filament is compatible with most FDM (Fused Deposition Modeling) printers that support 1.75mm filament. **General Specifications:** Manufacturer: ELEGOO Model: 50.203.0163 Color: Star gray Weight: 1 kg **Recommended Print Settings:** Drying settings before printing: 55 ± 5°C Ambient temperature and humidity: ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) Nozzle temperature: 200 - 230°C Table temperature (depending on printer and surface): 35 - 65°C Type of working surface: Textured PEI (polyetherimide) or other compatible plates Printing speed: Less than 280 mm/sec **Physical Properties:** Density: 1.30 g/cm³ Melting point: 161°C Deflection temperature under load: 56°C Softening temperature (Vicat test): 63°C **Mechanical Properties:** Tensile strength (XY): 38 ± 2 MPa Elongation at break (XY): 7.9% ± 1.6% Bending strength (XY): 74 ± 4 MPa Bending modulus (XY): 2979 ± 156 MPa Impact strength (XY): 65.5 ± 3.6 kJ/m²