iPhone 17 LCD Display and Touchscreen Assembly, Soft OLED, Diagnostic

Replacement display assembly with touch glass for iPhone 17. It is suitable for replacing a display damaged by a drop, scratches or other damage. Features: - Display type: Soft OLED - Brightness: 600–650 nits - True Tone support - Automatic brightness support - Original IC support - 360° polarized viewing - Wide Color gamut - Oleophobic coating - 3D Touch - 120 Hz This part can run diagnostics independently. Follow these steps: 1) Tap “Restart and complete repair”. 2) Tap “Continue”. 3) Connect to a Wi-Fi network. 4) Agree to Apple collecting diagnostic data. 5) Wait for configuration to finish. 6) Tap “Continue”. 7) Wait for the next configuration step to finish. 8) The process is complete. The display will not appear as an unknown part. Have the installation performed by an authorized service provider. Observe antistatic precautions: work on an antistatic mat and use an antistatic wrist strap if necessary. Make sure all parts that may be affected by static electricity are properly covered with antistatic tape. Thoroughly test the display before installation, including touch operation, colors, brightness, sensor operation and pixel display accuracy. Disconnect the battery before installation and ensure the connectors are properly connected. After installation, perform a thorough check again.